Test sample allocation method for testability verification test

An extended failure mode effect and criticality analysis (FMECA)-based sample allocation method for testability verification is presented in this study to deal with the poor representativeness of test sample sets and the randomness of the testability evaluation results caused by unreasonable selection of failure samples. First, the fault propagation intensity is introduced as part of the extended information of FMECA, and the sample allocation impact factors of component units and failure modes are determined under this framework. Then, the failure mode similarity and impact factor support are defined, and the game decision method for weighing the relationship between similarity and support is proposed to obtain the weight of failure mode impact factor. Finally, a two-step allocation framework of test samples is formulated to realize the sample allocation of component units and failure modes. This method is applied to the testability verification test of a launch control system. Results show that this method can obtain more representative test samples compared with the traditional sample allocation method while effectively reducing randomness of single testability evaluation result.     

漆包机烘炉加热失效原因探究及处理

针对漆包机烘炉加热失效形式及产生原因,进行了深入的研究和分析。结果表明,影响烘炉加热失效的主要原因是加热管损坏及装配异常、催化剂表面粘有金属化合物等颗粒杂质、排废风机转速设定不合理,并对加热管、催化剂、排废风机提出了合理实用的技术措施,为降低烘炉加热失效提高加热效果提供帮助。     

尾矿库排水管封堵技术及相关事故处理

当尾矿库库底排水管强度不能满足坝体加高的承载要求，且无法进行加固或在使用过程中出现损坏迹象时，均应对其进行封堵。排水管的封堵位置与封堵长度关系到尾矿库的安全运行，必须高度重视，防止留下安全隐患。该文结合某矿山工程事故案例，提出了排水管封堵技术要求以及因排水管承载能力不足导致的事故处理方法，为类似尾矿库工程提供参考。     

Interfacial failure analysis of functionally graded adhesively bonded double supported tee joint of laminated FRP composite plates

This paper deals with three-dimensional non-linear finite element analyses to assess the structural behavior of adhesively-bonded double supported tee joint of laminated FRP composites having embedded interfacial failures. The onset of interfacial failures is predicted by using Tsai–Wu coupled stress failure criterion with pre-determined stress values. The concept of fracture mechanics principle is utilized to study the sustainability of the tee joint having interfacial failures pre-existed at the critical locations. Individual modes of the strain energy release rates (SERR) G_I, G_II and G_III, are considered as the damage growth parameters and, are evaluated using the Modified crack closure integral (MCCI) technique based on the concept of linear elastic fracture mechanics (LEFM). Based on the stress analyses, it has been observed that the interfacial failures in tee joint structure trigger at the interface of base plate and adhesive layer from both ends of base plate. Depending on the SERR magnitudes, it has been noticed that the interfacial failure propagates under mixed mode condition. Therefore total SERR (G_T) is considered as the governing parameter for damage propagation. Furthermore, efforts have been made to retard damage propagation rate by employing functionally graded adhesive (FGA) instead of monolithic adhesive material. Series of numerical simulations have been performed for varied interfacial failure length in functionally graded adhesively bonded double supported tee joint structure in order to achieve the significant effect of FGA with various modulus ratios on SERR. Material gradation of adhesive indicates significant SERR reduction at the incipient stage of failure which necessitates the use of functionally graded adhesive for the tee joint and prolong the service life of the structure.     

The use of ballistic movement as an additional method to assess performance of computer mice

This study investigates an additional method for independently evaluating performance of speed and accuracy of computer mice, based on five parameters of the initial submovement when aiming at a target. This first submovement is known to be carried out in a ballistic manner and hence the Fitts-type aiming movement may be studied by means of the established relationships for ballistic movement. To test the ballistic movement method, eight participants used four different computer mice to execute ballistic movements and Fitts-type aiming movements. Regression tests showed that the Fitts movement time was well correlated with the time and stopping-variable error of ballistic movement, implying that measuring ballistic movement parameters can predict the performance of Fitts-type aiming movements. More importantly, the use of ballistic movement method allows independent assessments of the speed and accuracy, providing additional information for input devices assessment and designs.Relevance to industryThe study illustrates the close correspondence between input device evaluation using the proposed ballistic movement method and Fitts' law. The ballistic movement method allows independent measures of speed and four types of accuracy, which should benefit input devices assessment and designs.     

Adaptive actuator failure compensation design for unknown chaotic multi‐input systems

In this paper, an adaptive control approach is designed for compensating the faults in the actuators of chaotic systems and maintaining the acceptable system stability. We propose a state‐feedback model reference adaptive control scheme for unknown chaotic multi‐input systems. Only the dimensions of the chaotic systems are required to be known. Based on Lyapunov stability theory, new adaptive control laws are synthesized to accommodate actuator failures and system nonlinearities. An illustrative example is studied. The simulation results show the effectiveness of the design method. Copyright © 2014 John Wiley & Sons, Ltd.     

Recent progress of physical failure analysis of GaN HEMTs

Gallium nitride (GaN)-based high-electron mobility transistors (HEMTs) are widely used in high power and high frequency application fields,due to the outstanding physical and chemical properties of the GaN material.However,GaN HEMTs suffer from degradations and even failures during practical applications,making physical analyses of post-failure devices extremely significant for reliability improvements and further device optimizations.In this paper,common physical characterization techniques for post failure analyses are introduced,several failure mechanisms and corresponding failure phenomena are reviewed and summarized,and finally device optimization methods are discussed.     

循环荷载作用下钢桥面铺装疲劳损伤失效行为研究

针对钢桥面铺装工程中普遍采用的改性沥青(Stone Matrix Asphalt,SMA)、浇筑式沥青(Guss asphalt,GA)、环氧沥青(Epoxy asphalt,EP)混合料双层铺装结构,进行了循环车载作用下钢桥面与沥青混凝土铺装疲劳损伤特性理论分析与试验研究。基于疲劳损伤度,研究了钢桥面铺装疲劳损伤失效行为和疲劳开裂过程中损伤场、应力和应变场动态演变机制,推导出疲劳失效时的损伤场、应力和应变场计算表达式,并给出钢桥面铺装疲劳寿命理论公式。以三座钢箱梁桥桥面铺装(润扬长江大桥2005,南京长江三桥2005,苏通大桥2008)为例,对不同铺装结构组合方案下的复合梁进行疲劳试验分析和使用寿命理论预测。实例研究结果表明,钢桥面铺装疲劳损伤失效行为预估模型合理可行;相较于改性沥青、浇筑式沥青,环氧沥青混合料具有较强高的强度低变形能力,更适合于大跨径钢桥面铺装抗疲劳的设计要求;由环氧沥青混合料组合而成的“双层环氧沥青混凝土”和“浇注式沥青混凝土(下层)+环氧沥青混凝土(上层)”的抗疲劳性能优于其它沥青混合料铺装结构组合方案,同等厚度组合情况下疲劳使用寿命可延长1倍~2倍以上;“双层环氧沥青混凝土”已应用于润扬长江大桥、南京长江三桥和苏通长江大桥钢桥面工程,并已成功运行10年以上,其跟踪观测结果良好。     

全面采矿法在小矿体开采中的应用

介绍了黄背场铅锌矿采用全面采矿法在小矿体开采和探矿中的应用实践,该工艺具有投入少、生产成本低,简单易行等特点,有很强的适应性和实用性。     

飞机电子系统线路的故障维修分析

飞机电子线路在飞行过程中的运行状态会对飞机飞行性能造成直接影响。电子线路在实际工作中会产生一些故障,此种故障较为常见,并且故障表现形式会存在一定差异。本文能对飞机线路维修方法进行简单阐述,对线路故障检修措施进行简单分析,最后提出线路故障预防措施。